Aqua Guard Wood Preservative Water Based – CS 090
Spreading Rate
12-15 m2/L
Thinning
Do not thin
For Application
For Application By Brush, Roller, Spray
Dry Time at 20°C
30 min to touch
CS 090 AQUA GUARD Wood Preservative is a ready-to-use water based wood preservative for amateur, professional and industrial use against wood Rot and Blue Stain on internal and external wood components such as windows, exterior doors, cladding, fences, eaves and carports. Not for use on wood in direct soil contactor in marine environment. Type: Wood preservative,water based. It contains: 3-iodo-2-propynyl butylcarbamate (55406-53-6)0,75 % w/w and Propiconazole (ISO) (60207-90-1) 0,24 % w/w.
Colors: Clear Toxicity: Formulated without lead or mercury Gloss Levels: Flat 0-5 |
Surfaces must be clean, dry and free of dirt, oil or grease. Completely remove old or poorly adhering varnish and paint to expose new wood. On tropical wood wash down with nitro thinner to remove resins that may lengthen dry times. It mildew is evident it must be removed by scrubbing with a commercial mildew wash, following manufacturer’s direction and cautions.
Stir thoroughly before and during use. Apply without thinning by brush, cloth or by dipping. For greater protection finish by applying 2 coats of colored CS093/094 Acrylic Varnish. Do not apply when temperature is below 10°C or against the hot sun. Drying times are longer in cool/moist condition.
Caution
Do not explose exterior wood only with a preservative or colorless.
Notice
Uneven color might show on film if applied when high humidity is present, which will disappear in time.
- Clean equipment in warm, soapy water.