Metal Guard Hard Alkyd Metal Enamel – CS 598

Spreading Rate
15-16 m2/L

Thinning
5-10% low odour white spirits

For Application
Brush, Roller, Spray

Dry Time at 20°C
3-4h to touch
CS 598 Metal Guard is a hard, tough durable enamel for metal surfaces. It forms a Rust-Preventive coating on properly primed metal surfaces. Features excellent adhesion, hiding and leveling properties. Superior weather resistance and color retention. Ideal for new primed metal or previously painted surfaces, such as doors, railing, frames, windows, industrial equipment.
Colors: White, black and over 3.500 tinted colors. Toxicity: Formulated without lead or mercury Gloss Level: 90 – 95 at 60 degree viewing angle |
Packaging: 0.75 lt, 2.25 lt
Stir thoroughly before and during use. Apply by brush, roller or spray. Thin 5%-10% with low odour white spirits. Do not apply when air or surface temperature is below 10°C or when the humidity is high. Drying times are longer under cool/moist conditions.
Clean brushes and equipment with white spirits.
● Flammable liquid and vapour. ● Causes damage to organs through prolonged or repeated exposure. ● May cause an allergic skin reaction. ● May cause drowsiness or dizziness. ● Toxic to aquatic life with long lasting effects. ● Repeated exposure may cause skin dryness or cracking. ● Contains: cobalt bis(2-ethylhexanoate) and 2-BUTANONE OXIME. May produce an allergic reaction. ● Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. ● In case of fire: use carbon dioxide, foam, chemical powder to extinguish. • Do not breathe dust / fume / gas / mist / vapours / spray. ● Get medical advice or attention if you feel unwell. ● Use only outdoors or in a well-ventilated area. ● Wear protective gloves / eye protection / face protection. ● IF ON SKIN: Wash with plenty of water and soap. ● If skin irritation or rash occurs: Get medical advice or attention. ● IF INHALED: Remove person to fresh air and keep comfortable for breathing. ● Store locked up. ● Store in a well-ventilated place. ● Keep container tightly closed. ● Keep cool. ● Avoid release to the environment. ● Dispose of contents/container to appropriate waste side in accordance with local/regional/national/international regulations. Contains: Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%) cobalt bis(2-ethylhexanoate) and Naphtha (petroleum) hydrotreated heavy: Low boiling point hydrogen treated naphtha.
TEL. POISON CENTER GR: 210 7793777

